Default Setting (System Menu)
9-88
3 Select a One Touch Key number (0001 to 1000) for the destination, and press [Add/Edit]. Pressing Quick
No. Search key or [No.] enables direct entry of a One Touch Key number.
Select a One Touch Key with no registered destination.
4 Press [Change] of Display Name.
5 Enter the One Touch Key name (up to 32 characters) displayed in the send base screen, and press [OK].
NOTE: Refer to the Character Entry Method on page Appendix-9 for details on entering characters.
6 Press [Change] of Destination. The address book appears.
7 Select a destination (contact or group) to add to the One Touch Key number, and press [OK].
Pressing [Detail] shows the detailed information of the selected destination.
NOTE: Destinations can be sorted or searched by destination name or address number. Refer to Specifying
Destination on page 3-40 for Address List.
8 Press [Save]. The destination will be added to the One Touch Key.
Editing One Touch Key
Edit/delete the destinations you added to One Touch Key.
Use the procedure below to edit the One Touch key.
1 Press the System Menu key.
2 Press [Edit Destination] and then [Add/Edit] of One Touch Key.
3 Select a One Touch Key number (0001 to 1000) for the destination. Pressing Quick No. Search key or [No.]
enables direct entry of a One Touch Key number.
The procedure differs depending on the details to be edited.
Changing the Registered Information
1 Press [Add/Edit].
2 Select a new destination (Contact or group). Pressing [Detail] shows the detailed information of the
selected destination.
NOTE: Destinations can be sorted or searched by destination name or address number. Refer to
Specifying Destination on page 3-40 for Address List.
3 Press [OK].
4 Press [Yes] on the screen to add the destination to the One Touch Key.
Deleting the Registered Information
1 Press [Delete].
2 Press [Yes] on the screen to confirm the deletion of the data registered in the One Touch Key.
To Next Page
Loading...
Need help?
General
