Management
10-21
10
Login/Logout
If job accounting is enabled, an account ID entry screen appears each time you use this machine.
Use the procedure below to login and logout.
Login
1 In the screen below, enter the account ID using the
numeric keys and press [Login].
NOTE: If you entered a wrong character, press the
Clear key and enter the account ID again.
If the entered account ID does not match the registered
ID, a warning beep will sound and login will fail. Enter
the correct account ID.
By pressing [Check Counter], you can refer to the number
of pages printed and the number of pages scanned.
ļµWhen the screen to enter the login user
name and password appears
If user login administration is enabled, the screen to
enter the login user name and password appears.
Enter a login user name and password to login.
(Refer to Login/Logout on page 10-3.) If the user
has already registered the account information, the
account ID entry would be skipped. (Refer to
Adding a User (Local User List) on page 10-5.)
2 Proceed to complete the rest of the steps.
Logout
When the operations are complete, press the
Authentication/Logout key to return to the account ID
entry screen.
To Next Page
Loading...
Need help?
General
