Management
10-25
10
ļµ [Total] selected for Copy/Printer Count
Applying Restriction
Restriction can be applied in two modes as follows:
* Select [Off], [Use Port 1 Only] or [Use Port 2 Only] as the FAX Port Restriction setting.
Use the procedure below to select a restriction method.
1 Follow steps 1 to 4 of Adding an Account
(Accounting List) on page 10-22.
2 Press [Change] for the item to be restricted.
3 Select the restriction mode.
If [Counter Limit] is selected, press [+],[-] or
numeric keys to select the number of pages.
4 Press [OK].
5 Repeat steps 2 to 4 for other accounts to be
restricted.
6 Press [Save]. The restricted account is added.
Item Detail
Print Restriction (Total)
Limits the total number of sheets used for copying and printing.
Print Restr. (Full Color) Limits the number of sheets used for full-color printing.
Print Restr. (SingleColor) Limits the number of sheets used for single-color printing.
Scan Restriction (Others) Limits the number of sheets scanned (excludes copying).
FAX TX Restriction Limits the number of sheets sent by fax. This is displayed
when the optional fax kit is installed.
FAX Port Restriction Restricts the ports used for faxing. This is displayed when two
optional FAX kits are installed.
Item Description
Off No restriction given
Counter Limit Restricts the print counter in one-page increments up to
9,999,999 copies.
Reject Usage Restriction is applied.
To Next Page
Loading...
Need help?
General
