Utax CDC 1930 User Manual

Troubleshooting
12-20
2101 Failed to send via SMB.
Failed to send via FTP.
Check the network and SMB settings.
Check the network and FTP settings.
- The network cable is connected.
- The hub is not operating properly.
- The server is not operating properly.
- Host name and IP address
- Port number
2-25
Failed to send the e-mail.
Failed to send i-FAX.
Check the network and Embedded
Web Server RX.
- The network cable is connected.
- The hub is not operating properly.
- The server is not operating properly.
-
POP3 server name of the POP3 user
- SMTP server name
2102
2103
Failed to send via FTP. Check the following of the FTP
server.
- Is FTP available?
- The server is not operating properly.
—
Check the network.
- The network cable is connected.
- The hub is not operating properly.
- The server is not operating properly
Failed to send the e-mail.
Failed to send i-FAX.
Check the network.
- The network cable is connected.
- The hub is not operating properly.
- The server is not operating properly.
2201 Failed to send the e-mail.
Failed to send via FTP.
Failed to send via SMB.
Failed to send i-FAX.
Check the network.
- The network cable is connected.
- The hub is not operating properly.
- The server is not operating properly.
—
2202 Failed to send the e-mail.
Failed to send via FTP.
Failed to send i-FAX.
2203 Failed to send via FTP.
Failed to send via SMB.
2231 Failed to send via FTP.
2204 Failed to send the e-mail.
Failed to send i-FAX.
Check the e-mail size limit of the
SMTP settings on the Embedded
Web Server RX.
2-25
Error
Code
Error Message Corrective Actions Reference Page

Utax CDC 1930 Specifications

General

Brand	Utax
Model	CDC 1930
Category	All in One Printer
Language	English