Preparation before Use
2-30
3 Press the (Paper Width Guide) Lock to release the
lock. Grasp the paper width adjusting tab and move
the paper width guides to fit the paper.
4 Align the paper flush against the right side of the
cassette.
After removing new paper from its packaging, fan
the paper before loading it in the cassette.
(Refer to Before Loading Paper on page 2-28)
IMPORTANT:
• Before loading the paper, be sure that it is not
curled or folded. Paper that is curled or folded may
cause paper jams.
• Ensure that the loaded paper does not exceed the
level indicator (see illustration on the left).
• When loading the paper, keep the side that was
closest to the package seal facing up.
• The paper length and width guides must be
adjusted to the paper size. Loading the paper
without adjusting these guides may cause skewed
feeding and paper jams.
To Next Page
Loading...
Need help?
General
