Status / Job Cancel
7-16
NOTE: If the address of the selected destination has
been changed after you selected the destination from
the address book, [*] is displayed before [Address
Entry]. Refer to Confirming Current Destination on
page 7-14 and reconfirm the destination address.
Automatic Job Log History Transmission
This function automatically sends the job log history to the specified destinations whenever a set number of jobs
has been logged.
Use the procedure below to set automatic job log history transmission.
1 In the Job Log History menu, press the or key
to select [Auto Sending].
2 Press the OK key. Auto Sending appears.
3 Press the or key to select [Off] or [On].
If you select [On] and press the OK key, Jobs
appears. Use the numeric keys to enter the
number of jobs to be sent at a time.
4 Press the OK key. Completed. is displayed and the
screen returns to the Job Log History menu.
Manual Job Log History Transmission
You can also send the job log history to the specified destinations manually.
Use the procedure below to send the job log history manually.
To Next Page
Loading...
Need help?
General
