Utax P-C2665 MFP - Page 251

Status / Job Cancel
7-17
7
1 In the Job Log History menu, press the  or  key
to select [Send History].
2 Press the OK key. A confirmation screen appears.
IMPORTANT: If no destination is registered, Enter
destination is displayed. Refer to Registering
Destination on page 7-15 and register the desired
destination
3 Press [Yes] (the Left Select key). Accepted. is
displayed and the job log is sent to the registered
destination before the screen returns to the Job
Log History menu.
Setting E-mail Subject
Set the subject automatically entered when sending job log histories by e-mail.
Use the procedure below to set the subject.
1 In the Job Log History menu, press the  or  key
to select [Subject].
2 Press the OK key. Subject appears.
NOTE: Refer to Character Entry Method on
Appendix-9 for details on entering characters.
3 Enter the subject.
4 Press the OK key. Completed. is displayed and the
screen returns to the Job Log History menu.
Job Log History: a b
1 Auto Sending
*********************
3 Destination
[ Exit ]
2 Send History
Send the job log
history.
Are you sure?
[ Yes ] [ No ]
Enter destination.
Job Log History: a b
2 Send History
3 Destination
*********************
[ Exit ]
4 Subject
Subject: B b
%printer
*
ABC
[ Text ]