Utax P-C2665 MFP User Manual

Default Setting (System Menu)
8-100
Use the procedure below to select the emulation.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [Printer].
2 Press the OK key. The Printer menu appears.
3 Press the  or  key to select [Emuration Set.].
4 Press the OK key. Emuration Set. appears.
5 Press the  or  key to select the printer you want
to emulate.
6 Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
NOTE: If you select [KPDL] or [KPDL(Auto)], the
operation after selecting the emulation is different from
others.
If you select [KPDL], refer to page 8-101
.
If you select [KPDL(Auto)], refer to page 8-101.
Sys. Menu/Count.: a b
7 Copy
*********************
9 Send
[ Exit ]
8 Printer
Printer: a b
*********************
2 Color Setting
3 EcoPrint
[ Exit ]
1 Emulation Set.
Emulation Set.: a b
*********************
2 KPDL
3 KPDL(Auto)
1 *PCL6

Utax P-C2665 MFP Specifications

General

Brand	Utax
Model	P-C2665 MFP
Category	All in One Printer
Language	English