D291308.7M.fm Customizing the Main Screen Logo
Chapter 3: Operation 65
Customizing the Main Screen Logo
The V-TEK logo on the Main Screen can be replaced with a customer’s own logo. This may be
desirable if peel test results are being printed directly from the screen and sent to customers.
To insert a different logo into the field currently occupied by the V-TEK logo on the Main Screen,
follow the steps below.
1. Find an appropriate bitmap logo file.
2. Rename the logo comlogo.bmp.
3. Save the new file in C:\V-TEK\PT-55\
Note: The maximize size of the logo bitmap is 2.5” wide and 0.5” high.
Additional Notes
Thank you for purchasing this equipment and software from V-TEK, Inc. If you experience any
difficulties with the machine or software, please feel free to call your V-TEK representative.
To Next Page
Loading...
