V-TEK PT-55 - Calibration

D291308.6r.fm Calibration
Chapter 4: Maintenance & Calibration 69
Calibration
Equipment Required:
• 50 gram weight
• 100 gram weight
• 200 gram weight
Note: Calibration weights sold separately.
Calibration Procedure
In the event that the load cell is replaced or if it is part of a maintenance routine, the load cell can
be recalibrated by following the steps outlined.
Note: Once calibration has started, all calibration data will be lost and recalibrating is
required.
1. From the Main screen, click the Supervisor button.
Figure 4.1
Figure 4.2