Need help?Do you have a question about the V-TEK PT-55 and is the answer not in the manual?
Identifies the product as the PT-55 SMD Tape Peel Force Tester User's Guide.
Declares the machinery's compliance with health and safety requirements and relevant directives.
Introduces the manual and lists the main features of the PT-55.
Defines the proper usage and explains the fundamental principles of the PT-55.
Provides information on operating conditions, physical specifications, and power requirements.
Describes the recommended environment and warns against improper use of the PT-55.
Outlines safety guidelines, precautions, and provides contact details for customer service.
Introduces the basic layout and components of the PT-55.
Details the ports and switches located on the rear panel of the PT-55.
Explains the load cell, its position screw, and alligator clip.
Describes the various parts of the carriage assembly.
Explains the information presented on the PT-55 serial plate.
Covers the initial setup steps for the PT-55.
Guidelines for selecting and preparing a suitable workspace for the PT-55.
Steps for installing the optional security bracket for the laptop.
Procedures for installing the PT-55 software and USB/Serial drivers.
Configuration of auto tension and data saving modes within the software.
Steps for setting up and performing a peel force test.
Details on operating the PT-55 software and performing tests.
Overview of the PT-55 software and its main screen functions.
Explains how to input and manage customer, carrier, and seal tape data.
Understanding the peel test graph and displayed statistical values.
How to access and configure supervisor settings for fields and options.
Step-by-step guide to setting up and executing a peel force test.
Procedures for creating master forms and exporting test results in CSV/MAF formats.
Covers procedures for maintaining and calibrating the PT-55.
Guidance on periodic maintenance and calibration of the PT-55.
Step-by-step instructions for recalibrating the load cell.
How to validate the calibration accuracy of the PT-55.
Instructions for modifying computer BIOS settings, specifically for USB startup.
Alphabetical listing of topics and their corresponding page numbers.
Lists part numbers, descriptions, and quantities for PT-55 spare parts.
Information on how to contact V-TEK for service, parts, and inquiries.
Lists associated documents and provides warranty details for the PT-55.
Identifies the product as the PT-55 SMD Tape Peel Force Tester User's Guide.
Declares the machinery's compliance with health and safety requirements and relevant directives.
Introduces the manual and lists the main features of the PT-55.
Defines the proper usage and explains the fundamental principles of the PT-55.
Provides information on operating conditions, physical specifications, and power requirements.
Describes the recommended environment and warns against improper use of the PT-55.
Outlines safety guidelines, precautions, and provides contact details for customer service.
Introduces the basic layout and components of the PT-55.
Details the ports and switches located on the rear panel of the PT-55.
Explains the load cell, its position screw, and alligator clip.
Describes the various parts of the carriage assembly.
Explains the information presented on the PT-55 serial plate.
Covers the initial setup steps for the PT-55.
Guidelines for selecting and preparing a suitable workspace for the PT-55.
Steps for installing the optional security bracket for the laptop.
Procedures for installing the PT-55 software and USB/Serial drivers.
Configuration of auto tension and data saving modes within the software.
Steps for setting up and performing a peel force test.
Details on operating the PT-55 software and performing tests.
Overview of the PT-55 software and its main screen functions.
Explains how to input and manage customer, carrier, and seal tape data.
Understanding the peel test graph and displayed statistical values.
How to access and configure supervisor settings for fields and options.
Step-by-step guide to setting up and executing a peel force test.
Procedures for creating master forms and exporting test results in CSV/MAF formats.
Covers procedures for maintaining and calibrating the PT-55.
Guidance on periodic maintenance and calibration of the PT-55.
Step-by-step instructions for recalibrating the load cell.
How to validate the calibration accuracy of the PT-55.
Instructions for modifying computer BIOS settings, specifically for USB startup.
Alphabetical listing of topics and their corresponding page numbers.
Lists part numbers, descriptions, and quantities for PT-55 spare parts.
Information on how to contact V-TEK for service, parts, and inquiries.
Lists associated documents and provides warranty details for the PT-55.
General| Brand | V-TEK |
|---|---|
| Model | PT-55 |
| Category | Test Equipment |
| Language | English |
To Next Page
