Vacon 100 INDUSTRIAL - Page 152

vacon • 152 Parameters
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
Value ‘1’ selected for parameter P3.3.3.1:
According to how many of the inputs assigned for Preset frequency selections are active, you can
apply the Preset frequencies 1 to 3.
P3.3.3.10 P
RESET FREQ SEL0
P3.3.3.11 P
RESET FREQ SEL1
P3.3.3.12 P
RESET FREQ SEL2
Connect a digital input to these functions (see chapter 7.1.2) to be able to apply Preset frequencies
1 to 7 (see Table 141 and pages 99, 103 and 151).
Table 142. Selection of preset frequencies; = input activated
Activated input Activated frequency
P3.3.3.12 P3.3.3.11 P3.3.3.10 Preset Freq 1
P3.3.3.12
P3.3.3.11 P3.3.3.10 Preset Freq 1
P3.3.3.12 P3.3.3.11 P3.3.3.10 Preset Freq 1
P3.3.3.12
P3.3.3.11 P3.3.3.10 Preset Freq 2
P3.3.3.12 P3.3.3.11 P3.3.3.10 Preset Freq 2
P3.3.3.12 P3.3.3.11 P3.3.3.10 Preset Freq 2
P3.3.3.12 P3.3.3.11 P3.3.3.10 Preset Freq 3