5
vacon • 56 Installation
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
Step 3. To change the IP settings, navigate to the "5. I/O and Hardware" menu and select the slot
that the option board is connected to. You can change the IP address, network mask and default gate
address in the menu item "5.x.3 Parameters". After you have changed the IP settings, you need to
change "IP Mode" to "Fixed IP" in order to activate the settings. For more information about these
settings, see Chapter 6.1 "Option board menu".
Figure 32. VACON
®
Live: OPTEA IP Address Mode
To Next Page
Loading...
