VADDIO PCC Premier - Camera Pan and Tilt Control

camera pan
Moves the specified camera horizontally
Synopsis camera <1 - 16> pan {left [<speed>] | right [<speed>] | stop }
Required <1 - 16> Cameras 1 – 8 are on the Control A bus.
Cameras 9 – 16 are on the Control B bus.
Options
left
Moves the camera left
right
Moves the camera right
stop
Stops the camera's horizontal movement
speed [1 - 24] Optional - integer 1 - 24 specifies the speed for
right or left movement
Default speed is 12
Examples
camera 3 pan left
Pans camera 3 left at the default speed
camera 3 pan right 20
Pans camera 3 right using a speed of 20
camera 3 pan stop
Stops camera 3's horizontal motion
camera tilt
Moves the specified camera vertically.
Synopsis camera <1 - 16> tilt{up [<speed>] | down [<speed>] | stop }
Required <1 - 16> Cameras 1 – 8 are on the Control A bus.
Cameras 9 – 16 are on the Control B bus.
Options
up
Moves the camera up
down
Moves the camera down
stop
Stops the camera's vertical movement
speed [1 - 20] Optional - integer 1 - 20 specifies the speed for
up or down movement
Default speed is 10
Examples
camera 3 tilt up
Tilts camera 3 up at the default speed
camera 5 tilt down 20
Tilts camera 5 down using a speed of 20
camera 5 tilt stop
Stops camera 5's vertical motion
44
Integrator's Complete Guide to PCC Premier Precision Camera Controller