Specifications
Camera Management and Video Output
Control via RS-232 Up to 8 cameras
1 address book group
Control via IP
network
Up to 80 cameras
10 address book groups
Image Control
Parameters
n Iris, Iris Gain
n Backlight
compensation
n Red Gain, Blue Gain
n Detail, Chroma,
Gamma
n Auto White
Balance/One-Push
White Balance
(depends on camera’s
capabilities)
HDMI Output
IP streaming decoder: H.264
Protocol : RTSP
Supported HDMI display resolutions:
1080p/60, 1080p/50, 720p/60, 720p/50
Hardware
System I/O n 8 RS-232 camera control ports on RJ-45 connectors
n Gigabit Ethernet port with PoE+ support
n HDMI output
Control console n 7” capacitive touch panel display – Camera presets and administrative menu
n Illuminated rotary knobs – Focus (control, auto/manual) and Menu (display
panel navigation)
n Rotary knobs – Pan, tilt, and zoom speed
n Illuminated pushbuttons – Group A and Group B camera selection
n 3-axis Hall effect joystick, single-button – Pan, tilt, and zoom
Power, Physical and Environmental
Power Requirements PoE+ (Power over
Ethernet)
Power Consumption < 25W
Height
5.125 in. (12.6 cm)
Operating temperature
0° to +40°C (32° to 104°F)
Width
17 in. (43.2 cm)
Operating humidity
20% to 80% RH
Depth
11 in. (27.9 cm)
Storage temperature
-5° to +60° C (23° to 140°F)
Weight
7.0 lb (3.18 kg)
Storage humidity
20% to 80% RH
Specifications are subject to change without notice.
51
Integrator's Complete Guide to PCC Premier Precision Camera Controller
To Next Page
Loading...