VADDIO PCC Premier - System Management Commands; Factory Reset Command

system factory-reset
Gets or sets the factory reset status. When the factory reset status is on, the system resets to factory
defaults on reboot.
Synopsis system factory-reset{get | on | off}
Options
get
Returns the camera's current factory reset
status.
on
Enables factory reset on reboot.
off
Disables factory reset on reboot.
Examples
system factory-reset get
Returns the factory reset status in this form:
factory-reset (software): off
factory-reset (hardware): off
The first line returned evaluates the most recent system factory-
reset on or off command, if one has been received. The second line
evaluates whether hardware settings will result in a factory reset on
reboot.
system factory-reset on
Enables factory reset upon reboot. Returns current status in this form:
factory-reset (software): on
factory-reset (hardware): off
sleep
Pauses for the specified number of milliseconds.
Synopsis sleep <milliseconds>
Options <milliseconds> The number of milliseconds (1 - 10000)to
pause
Example
sleep 7000
Pause for 7 seconds (7000 milliseconds) before returning.
help
Displays an overview of the CLI syntax.
Synopsis help
Example
help
Note:
Use ? as a command parameter to see information about a given command's syntax.
49
Integrator's Complete Guide to PCC Premier Precision Camera Controller