USER'S GUIDE ____________________________________________________________________
34 __________________________________________________________________ M210543EN-F
Installation Procedure
This section describes only one installation alternative using a sensor
support arm and Vaisala weather station as the host computer.
Unpacking PWD22/52
The delivery contents are specified in the packing list included with the
delivery documents. The PWD22/52 equipment is usually delivered in
one case.
he case gently. Do not drop it.
To unpack PWD22/52:
1. Read the packing list supplied with the delivery documents.
Compare the packing list against the purchase order to make sure
that the shipment is complete.
2. Open the cover. In case of any discrepancies or damage, contact the
supplier immediately.
3. Place the packing materials and cover back in the delivery case and
store them for possible reshipment.
Do not touch or hit the Vaisala RAINCAP
®
Rain Sensor plate. It is
Do not bend the signal cable with less than 2 cm (1 inch) radius, and do
not leave it unsup
ported to lean to the ground or table.
Storage
Store PWD22/52 in its package in dry conditions, not in the open air. The
storage conditions are as follows:
- Temperature -40 °C to 70 °C
- Relative humidity up to 95 %
To Next Page
Loading...
