Vaisala PWD22 - Weather Related Commands; Wpar; Wset

Chapter 5 ________________________________________________________________ Operation
VAISALA _______________________________________________________________________ 59
Commands
PWD22/52 Commands
HELP
Use HELP to get information about available commands.
Table 14 Command Set
Command
Description
OPEN
Assigns the line for operator commands.
CLOSE
Releases the line for automatic messages.
MES Number
Displays data message.
AMES Number Interval
Automatic message (with parameters Number
and Interval)
CLRS
Clears precipitation sums.
STA
Displays status.
PAR
Parameter message.
HIST Parameter
For Vaisala systems use.
INTV Time
For Vaisala systems use.
TIME hh:mm:ss
Set/Display system time.
DATE yyyy:mm:dd
Set/Display system date.
WPAR
Weather parameter message.
CHEC
Displays calibrator test signal.
ZERO
Displays zero and noise test status.
CAL Calibrator_frequency
Calibration.
CONF Password
Updates configuration.
WSET
PRW reference values.
CLEAN
Sets clean references.
BAUD Rate Commn._type
Baud rate setting
(Rate 300, 1200, 2400, 4800, 9600)
(Communication type E (7E1) or N (8N1))
DRY ON
Sets RAINCAP
®
dry offset.
WET ON
Sets RAINCAP
®
wet scale.
ACAL
Analog output calibration.
BLSC
Background luminance scale / enable.
RESET
Hardware reset by watchdog.