Vaisala PWD22 - Basic Wiring; Table 6 Receptable Connector Default Wiring

Chapter 4 _______________________________________________________________ Installation
VAISALA _______________________________________________________________________ 35
Mounting
To mount PWD22/52, do one of the following:
- Attach PWD22/52 on the support arm with the Standard Mounting
Clamp.
0308-005
Figure 8 Installing PWD22/52 on the Support Arm
- Install the sensor on the mast with Vaisala Clamp Assembly. Note that
you need an optional Mounting Clamp for Pole Mast for the mast
assembly.
0308-004
Figure 9 Installing the Sensor on the Mast with Optional
Mounting Clamp
Do not
touch the RAINCAP
®
plate.