Vaisala PWD22 - Page 82

USER'S GUIDE ____________________________________________________________________
80 __________________________________________________________________ M210543EN-F
Other Commands
TIME
Use the TIME command during maintenance to display the current
system time:
TIME
The following is an example of the system output:
10:11:12
To set the time, use the following command:
TIME hh mm ss
where
hh
=
hours
mm
=
minutes
ss
=
seconds
The time and date has to be reset after a power break. There is no battery
backup
.
DATE
Use the DATE command to display the current date.
To set a new system date, type the following:
DATE yyyy mm dd
where
yyyy
=
year
mm
=
month
dd
=
day