2. Make sure that the bleeding valves for the rear brakes and hydraulic trailer
brakes are closed.
3. Lock the brake pedals together.
4. Open the bleeding nipples.
There is one bleeding nipple on both sides.
GUID-92EF53D6-6FA3-438F-A7D1-490CE65AC965
1. Bleeding nipple
5. Put a hose from both bleeding nipples to containers.
6. Pump the pedals slowly until there are no air bubbles in the oil.
The oil has been changed when about 0.2 litres has come out from each
side.
It is not necessary to adjust the front brakes.
4.7.6.3 Cleaning the cooling system
Clean the cooling system periodically.
To Next Page
Loading...
