EasyManua.ls Logo

Varian Solid-State NMR - Figure 37. MASEXCH1 Pulse Sequence

Default Icon
134 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 6. Solid-State NMR Experiments
91
VNMR 6.1C User Guide: Solid-State NMR 01-999162-00 C0402
Parameters
MASEXCH1makes use of the
UNITY
INOVA and UNITYplus parameters tpwr, tpwrm,
dpwr, cppwr, dipolr, crossp, dblvl2, pw and cntct. See page 85 for a
description of these parameters.
pwx is the observe 90
° pulse in microseconds.
phase is 1,2 for P type, the Veeman experiment, for transformation with
wft2d(1,0,0,1,0,-1,1,0) and 1,2,3,4 for the phase sensitive spectrum
according to the reference for transformation with wft2d(1,0,0,1,1,0,0,
-1,0,-1,1,0,0,1,1,0). The phase-sensitive spectrum is the sum of a Veeman
experiment, phase=1,2 and a time-reversed experiment, phase=3,4.
mix is the mixing time, in seconds. For phase=1,2,3,4 the minimum mixing time is
equal to (ni-1/sw1). For phase=1,2 the minimum mixing time is 0.0.
sync='y' to run with rotor synchronization. sync='n' to run unsynchronized (normal)
NOESY.
nt is a minimum of 16.
Reference
Luz, Z.; Spiess, H. W.; Titman, J. J. Israel J. of Chem. 1992, 32, 145.
Figure 37. MASEXCH1 Pulse Sequence
pw
cntct
cntct
(tpwrm)
(crossp)
(dipolr)
Tx
Dec
at
d1
AC
pwx
d2
pwx
mix
sync='y'
mix = n/srate for phase=1,2
mix =n/srate-d2 for phase=3,4

Table of Contents

Related product manuals