Vatech PaX-i Plus User Manual

9. Installing Software
PaX-i Plus / Insight Installation Manual 109
Initiating the Imaging Program
1. Click the Acquisition tab. The imaging mode selection buttons appear.
The imaging mode selection buttons in the left pane may appear
different, depending on the equipment’s capacity to acquire image
2. Select the imaging mode. Then, the main GUI in the selected imaging mode appears.
The error code [E001.001.000], indicating that the equipment is still
in the packing mode, should disappear when the command to exit
the packing mode is executed. See the section 9.5.3 Configuring
the parameters > Disabling the packing mode to disable packing
mode
3. Proceed to the section 9.5.3 Configuring the parameters.

Vatech PaX-i Plus Specifications

General

Brand	Vatech
Model	PaX-i Plus
Category	Dental equipment
Language	English