Software Maintenance Example Software Download Procedure
62
Download (Menu>Software Maintenance>Download)
This screen lets you do USB downloads from either a valid V-R Code/Features USB thumb drive or a V-R Recovery USB
thumb drive that is plugged into a USB port in the console.
K
eep the V-R Code/Feature and Recovery USB thumb drives in a secure location.
Example Software Download Procedure
1. Insert the Software Maintenance thumb drive into one of the USB ports.
2. Navigate to the Menu>Software Maintenance>Download screen.
Table 4. Download Screen Field Descriptions
Field Description
Current Version Current version of software (x.xx xxx.x) installed in the console
Available Version Version of software that can be accessed on the USB drive.
Current Operation Status of the console:
Idle (no backup procedure is executing),
Scanning Devices (system is validating installed thumb drive),
Reading Update List
Downloading
Connection Message Lists any messages that may occur between the device and the console.
Download Source Device where the files are coming from.
Version Date and software version of when the data archive was created.
Download Starts the actual download.
NOTE: When you click Download, a confirmation prompt displays, letting you know that the system will
restart (reboot) to do the download. If the system is not in use, touch the button to continue. The
system reboots and the database is restored.
Download Progress Completion percentage of download process.
System Status
07/20/2013 09:10 AM
0 Warning(s)
0 Alarms(s)
Print (0)
Home
Favorites
Menu
Actions
Software Maintenance
Current Version
Available Version
Current Operations
Backup Destination
Version
1.gB 230.4
Not available
Select a source to retrieve versions available
IDLE
Download
Select Source
To Next Page
Loading...
Need help?
General
