VER-MAC PCMS-1210 QS - Erasing Existing Messages

5.0 Operations
Ver-Mac - May 2011 1210 QuickStep Programming User Manual, Ver 5.0 19
5.4.4 Erasing an Existing Message
[ ] Enter > Main Menu > [F3] Message
Figure 18 – Erasing an Existing Message
1. Select the message you need to edit:
• overwrite the last two digits of the MSG number
or
• use the arrows [] to scroll through existing messages and press
[ ] Enter
2. The blinking cursor appears at the beginning of line 1 of the text in
the message area.
3. To erase the entire message, press [DEL]
4. Press [ ] Enter to confirm deletion and return to the Message Menu
or
Press [ESC] to discard change (deletion) and return to the Message
Menu
5. Press [ESC] once more to return to the Main Menu