Vertiv Liebert MCV440 - 2.2 Component Location

Digit Description
Digit 12 - Panel Material
G = Galvanized steel
Digit 13 - Connection Pipe Unit of Measurement
0 = Inches (std. ACR copper)
Digit 14 - Legs Included
0 = No legs (standard)
Digit 15 - Agency Certification
U = CSA listed, marked with CSA c-us logo
Digit 16 - Undefined, Reserved for future use.
Digit 17 - Receiver/Software Configuration
0 = Liebert® DSE software, no receivers
2 = Liebert® DSEsoftware, with receivers
Digits 18-21 - Undefined, Reserved for future use.
Digits 22-25 - Factory configuration number
Table 2.2 Liebert® MCV Model Number Digit Definitions (continued)
2.2 Component Location
The unit component locations are described in the submittal documents included in Submittal Drawings.
The following table lists the relevant documents by number and title.
Document Number Title
DPN003888 Component Location Diagram, MCV330 + EconoPhase + Base Assembly
DPN003872 Component Location Diagram MCV330 (2) + EconoPhase (2) + Base Assembly
DPN00425 Component Location Diagram MCV440 + EconoPhase + Base Assembly
DPN004260 Component Location Diagram MCV440 (2) + EconoPhase + Base Assembly
20000039 Component Location Diagram MCV430 + Liebert® EconoPhase +Base Assembly
20000040 Component Location Diagram MCV430 (2) + Liebert® EconoPhase (2) + Base Assembly
Table 2.3 Heat Rejection Skid Component Location Drawings
6 Proprietary and Confidential ©2024 Vertiv Group Corp. 2 Nomenclature and Components
Vertiv™ Liebert® MCV Installer/User Guide