Operation
37
Operation
Safety
Read the safety instructions before using the machine
Before using and loading the machine the operator should read the
safety instructions carefully.
→ »Safety« Page 5.
Attention will assure yours and others safety.
Failure to follow the instructions may result in serious injuries.
Work on the machine should only be carried out by persons who
have been thoroughly instructed
The machine should only be operated when the operator has been
given thorough instructions.
Thorough machine instruction results in safe usage.
Insufficient instructions can result in wrong usage of the machine and
accidents.
Do not remove the protection guards
Check that all protection guards are in place before use.
This assures that the machine will offer maximum protection to the op-
erator.
If the safety guards are removed or not used it may result in serious
injuries and accidents.
Before operating
Make sure that the initial start of the machine is unhindered
Be aware of the area around the machine before start up.
Paying attention to the area around the machine will prevent injuring
persons or animals.
Insufficient attention to the area around the machine can result in se-
rious injuries.
Pay specific attention to children
Pay attention to the surrounding area before starting the machine.
Paying attention to the machine's surrounding area will prevent injur-
ing children.
Insufficient attention to the surrounding area can result in serious inju-
ries.
Following instructions should be complied with:
• Check all points mentioned in the section “maintenance”.
→ »Specific safety information« Page 53.
→ »Lubrication safety and use of oil« Page 53.
• Check knives are not worn down. The knives can be turned so they
rotate in the opposite direction.
→ »Knives« Page 67.
To Next Page
