Maintenance
57
Lubrication
Every day
P.T.O. shaft
> Press the nozzle on the grease gun over the grease nipple.
> Pump 1, max. 2 times with the grease gun.
→ »Maintenance intervals« Page 55.
→ »Lubricants« Page 97.
> Press the nozzle on the grease gun over the grease nipple.
> Pump 1, max. 2 times with the grease gun.
→ »Maintenance intervals« Page 55.
→ »Lubricants« Page 97.
Every 40 hours of use
Cutting unit
> Turn the cone until one of the three grease nipples is visible in the
hole shown.
> Press the nozzle on the grease gun over the grease nipple.
> Pump 1, max. 2 times with the grease gun.
> Remove the grease gun from the grease nipple.
> Turn the cone halfway round until the two grease nipples are visi-
ble in the hole.
> Press the nozzle on the grease gun over the grease nipples.
> Pump 1, max. 2 times with the grease gun.
→ »Maintenance intervals« Page 55.
→ »Lubricants« Page 97.
N
OTE
!
Be careful of knives and sharp edges.
58.237.000
58.237.000
58.237.000
To Next Page
Loading...
