70
Maintenance
Cones
Check the machine cones on a regular basis
The machine's cones must be checked and cleaned regularly.
Build up of plant waste can cause imbalance in the rotating parts.
Vibrations can cause damage on the machine.
External inspection
An external check of the cones is carried out in the following way:
→ »Maintenance intervals« Page 55.
> Remove the ring nut shown
> Open the machine's first protection.
> Carry out an external inspection of the cones on the right and left-
hand side for dirt.
> Clean the cones, if necessary.
Ring nut
To Next Page
Loading...
