Viessmann VITOCAL 250-A - Page 84

84
If the setting results in a higher set flow temperature
than the value set here, the set flow temperature will
be limited to this value.
2410 Set flow temperature limits, cooling, heating/cooling circuit 2
2410.0 Min. limit of set flow temperature for cooling, heating/cooling circuit 2
Limiting of set flow temperature for cooling via heating/
cooling circuit 2
The set flow temperature for cooling mode results from
the following:
■
Weather-compensated cooling mode: Constant set
flow temperature, depending on the type of cooling
circuit selected during commissioning, e.g. cooling
via underfloor heating circuit, cooling via fan convec-
tor
■
Room temperature-dependent cooling mode: From
the differential between the set and the actual room
temperature
If the setting results in a lower set flow temperature
than the value set here, the set flow temperature will
be limited to this value.
2410.1 Max. limit of set flow temperature for cooling, heating/cooling circuit 2
Limiting of set flow temperature for cooling via heating/
cooling circuit 2
The set flow temperature for cooling mode results from
the following:
■
Weather-compensated cooling mode: Constant set
flow temperature, depending on the type of cooling
circuit selected during commissioning, e.g. cooling
via underfloor heating circuit, cooling via fan convec-
tor
■
Room temperature-dependent cooling mode: From
the differential between the set and the actual room
temperature
If the setting results in a higher set flow temperature
than the value set here, the set flow temperature will
be limited to this value.
2411 Set flow temperature limits, cooling, heating/cooling circuit 3
2411.0 Min. limit of set flow temperature for cooling, heating/cooling circuit 3
Limiting of set flow temperature for cooling via heating/
cooling circuit 3
The set flow temperature for cooling mode results from
the following:
■
Weather-compensated cooling mode: Constant set
flow temperature, depending on the type of cooling
circuit selected during commissioning, e.g. cooling
via underfloor heating circuit, cooling via fan convec-
tor
■
Room temperature-dependent cooling mode: From
the differential between the set and the actual room
temperature
If the setting results in a lower set flow temperature
than the value set here, the set flow temperature will
be limited to this value.
Parameter group for heating/cooling circuit
2409 Set flow temperature limits, cooling,… (cont.)
6218234
Parameter