Compliance Information
68 Violin 6000 Series Memory Array Installation Guide 535-0045-00 Rev 02
FCC Class A Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case, you are required to correct the interference at your own expense.
Regulatory Information
For your protection, this product has been tested for conformance to various national and
international regulations and standards. The scope of this regulatory testing includes electrical and
mechanical safety, electromagnetic emissions, immunity, acoustics and hazardous materials.
Regulatory Model Number
For the purpose of regulatory compliance certifications and identification, this product is assigned
a Violin Memory regulatory model number. This number can be found on the product label, along
with the required approval markings and information. When requesting certification information for
this product, always refer to this regulatory model number.
Note: Do not confuse the regulatory model number with the marketing or model number.
Installation Conditions
See installation instructions before connecting this equipment to the input supply.
WARNING! The equipment must be provided with a proper AC protective earth (PE) ground
connection.
Network Connected Equipment
WARNING! The installation must provide a ground connection for the network equipment.
To Next Page
Loading...
