Vishay 7000 - System Group; Set Date;Time

Vishay Micro-Measurements System 7000 Programmer’s Reference Manual
Page 136 of 142
7.4.8 System Group
7.4.8.1 Set Date/Time
Length Command
Group
Command
Code
Card Mask Channel
Mask
Parameters
0x000D 0x08 0x0001 Ignored
0x0000
Ignored
0x00
Byte 8:
Second (0-59)
Byte 9
Minute (0-59)
Byte 10:
Hour (0-23)
Byte 11:
Day of Month (1-31)
Byte 12:
Month (1-12)
Byte 13:
Year (Last two digits only,
example: '06')
Byte 14:
Day of the week (1-7, 7 =
Sunday)
This command sets the date and time on the selected cards.