Vishay 7000 - Dataporttimeout Property (Read;Write)

Vishay Micro-Measurements System 7000 Programmer’s Reference Manual
Page 63 of 142
6.5.1.6 DataPortTimeout Property (Read/Write)
Syntax:
Get: HRESULT _stdcall DataPortTimeout(out retval long * Value );
Set: HRESULT _stdcall DataPortTimeout(in long Value );
Description:
This timeout value defines the amount of time (in milliseconds) to wait for bytes to be received
on the TCP data port.
Notes:
This value should not be set to less than 1000.