Vishay 7000 - Flash System Leds Method; Resetcard Method

Vishay Micro-Measurements System 7000 Programmer’s Reference Manual
Page 94 of 142
6.5.6.6Flash System LEDs Method
Syntax:
HRESULT _stdcall FlashSystemLEDs(in long LEDState, out retval long * result );
Description:
Flashes a pattern on the system’s front panel LEDs.
Arguments:
LEDState 0 = Stop Flashing Pattern
1 = Start Flashing Pattern
Returns:
0 if Successful, otherwise an Error Code
Notes:
6.5.6.7 ResetCard Method
Syntax:
HRESULT _stdcall ResetCard(in long CardNo, out retval long * result );
Description:
Performs a soft-reset on the selected card. The card settings are returned to the default state.
Arguments:
CardNo The card number (1-16)
Returns:
0 if Successful, otherwise an Error Code
Notes: