Vishay 7000 - Page 78

Vishay Micro-Measurements System 7000 Programmer’s Reference Manual
Page 78 of 142
Arguments:
CardNo The card number (1-16).
Enable 0 = Ignore Global Limits (default)
1 = Accept Global Limits
PreBufferSize The number of "pre-trigger" scans to be recorded when the global limit signal
goes active. (Range: 0 to 645,000, Default: 0)
PostBufferSize The number of "post-trigger" scans to be recorded when the global limit signal
goes inactive. (Range: 0 to 4294967295, Default: 0)
Returns:
0 if Successful, otherwise an Error Code
Notes:
The BufferSize must not be bigger than the configured Scan Buffer Size (see the ConfigureScan
method).