Vishay Micro-Measurements System 7000 Programmer’s Reference Manual
Page 89 of 142
Notes:
This method does not return an integer Success/Error status. Use the (LastErrorCode property to
check if an error occurred during the method.
[CR] represents the carriage return character ASCII 0x13.
The last data file information is not available (using this method) after the scanner is power-
cycled. If you have power-cycled your system before retrieving the scan data and information,
you will have to list the files on the card (ListFiles method), and view the date/time to retrieve
the correct header and data files (“.7KH” and “.7KD” extensions respectively). (Use the
RetrieveFile method.) The header file will contain the scan information and the data file
contains the scan data.
To Next Page
Loading...