Quantum EVO H.264 installation and user manual
NTP setup allows the DVR to have its
internal clock synchronised with an External
clock.
The default setting is “Off”
To set up hover on the “Off” a drop down
arrow will appear giving the option to turn
“On”.
Once “On”, two other options will appear:
Type allows selection between:
Default – Time server is “time.bora.net”.
Domain – Where another time
server name can be added.
IP – Where an IP address for a time server
can be input.
Once the NTP settings have been set, you
must then tell the DVR which time zone you
are in. This will allow it to offset any time
differences if the time server you contact is
in a different zone.
Select City, the map screen will appear.
Hover over the city selection box, a drop
down arrow will appear, click on the arrow.
A list of time zones will be displayed. Select
the time zone where the Quantum is
located.
Then click OK.
To Next Page
Loading...
