3. operation
You can modify the settings of
the MP-D201. You do this by
entering the menu. You can
find a graphical reproduction
of the menu. The sub-menus
are indicated with a colour.
OUTPUT DATA DAC VOL
RESET, V.INIT and INPUTS
In the Appendix ( chapter 7
of the manual ) you can find
various examples of how to
change the settings of the
MP-D201.
Selecting output
Here you can switch between
output-one and output-two.
Reset
Restore the settings of the
MP-D201 to its default settings.
DAC Volume control
The MP-D201 has a volume
control that you can use to
adjust the output volume of
the DAC module. The volume
control by default is turned
off When you turn the volume
controle on, the menu items
V.INIT, FIXED and OFFSET
will appear in the menu
(become visble).
When you use the MP-D201
together with a preamplifier
or integrated amplifier, it is
recommended that you bypass
the volume control of the MP-
D201.
MP-D201 Menu: introduction
To Next Page
Loading...