7. examples operation
7. examples
Example 7
Setting the output to
be RCA.
Outputs 1 and 2 are standard
set to XLR. If you want to use
the RCA output then you have
to change this in the menu.
Press the MENU button to
enter Menu Mode.
Navigate to the OUTPUT
submenu, using the function
buttons on the left front
1. Scroll forward in
the menu.
2. MENU/ Enter & Exit
SELECT submenus and
select settings.
3. Scroll backward
in the menu.
Enter the OUTPUT submenu
and navigate to OUT 2
(output 2) Select RCA out.
Output 2 is now set to be RCA.
MP-D201 Left front panel.
INPUT
MENU
SELECT
STANDBY
MUTE
MP-D
LEAVE
SETUP
OUTPUT
XLR OUT
RCA OUT
OUTPUT
SELECT
SELECT
MENU
To Next Page
Loading...