RC-010 System Remote
This is the RC-010. The
RC-010 is the Vitus Audio
System Remote that comes
standard with the MP-D201.
The RC-010 uses an infrared
sensor and communicates
with the products using the
RC5-protocol. It comes with
pre-installed functions for
communication with Vitus
Audio products. With the
RC-010 you can control all
Vitus Audio products in the
Signature and Masterpiece
series. The RC-010 has an
internal battery, that can
be charged with the loader
that is included. The RC-010
has an automatic standby
function. This is to ensure that
the battery lasts as long as
possible on one charge
The RC-010 has two hotkeys,
buttons 1 and 3. With these
hotkeys you can jump to
another product without
scrolling through the list
of products. The remote
automatically forwards
volume up and volume down
commands to the product
under hotkey 2.
Shipping mode
The RC-010 is put into
shipping mode before
transport. This means that the
motion sensor is disabled.
Shipping mode is disabled
by pushing any button. You
can put the RC-010 into
shipping mode by pressing the
following button combination.
Button (8+9)+(2+3). Press and
hold all 4 buttons. The screen
now shows Ship mode and
thereafter LEAVE MENU. Press
button 8 (select). The RC-010 is
now in shipping mode.
8. RC-010 system remote
2
4
8
5 6
7
10
VITUS
REP STBA/AB
To Next Page
Loading...