Vitus Audio MP-D201 - Example 4

39
MP-D201 | Version 1
7. examples operation
7. examples
*The menu item DAC VOL
becomes invisible when the
optional Volume Board is
installed.
Example 4
Setting the MP-D201
to remember the cur-
rent volume step.
In the V.INIT submenu you can
set the MP-D201 to remember
the current volume step. The MP-
D201 will start up in this volume
step when it leaves standby.
This volume step however is not
remembered when the power
cord is removed. Then the MP-
D201 will initiate in the volume
step as it is defined in the V.INIT
sub-menu.
Press the“MENU”button to
enter Menu Mode.
Navigate to the V.INIT
submenu, using the function
buttons on the left front
MP-D201 Left front panel.
INPUT
MENU
SELECT
STANDBY
MUTE
MP-D
1.  Scroll forward in the
menu.
2. MENU/ Enter & Exit
SELECT submenus and
selectsettings.
3.  Scroll backward in
the menu.
Go to REMEMBER press
SELECT. The display now
shows VOL.INIT. The MP-D201
will now start up in the current
volume step on initialization.
MENU
LEAVE
SETUP
DAC VOL
DATA
RESET
V.INIT
REMEMBER
V.INIT
SELECT
SELECT
SELECT
*