3. operation
3. operation
Input settings
The MP-D201 comes with
5 inputs. The settings for
each individual input can be
adjusted in the menu.The input
selection is saved automatically
every 10 minutes. Each time
you initialize the MP-D201, the
last saved setting is restored.
You can manually save a
setting by pressing the MENU
button down 2-3 sec. When
“SAVE” is shown in the display,
the setting has been saved.
Input name settings
As a standard, the inputs are
named input 1, input 2, etc. In
the text-menu you can find a
list of predefined input names.
If the name of your device is
not in the list, you can choose
to make your own device
name.
Input gain settings
Offset gain setting / Sensitivity
setting. Different sources often
have different output voltages.
This has a direct influence
on the typical volume level
that is needed for a specific
sound level, hence changing
between sources can result in
high sound level differences.
To accommodate easy
operation, we have included
a gain (or as some prefer to
call it – sensitivity setting) in
our amplifiers – it simply sets
the volume starting point at a
specific volume – to match the
source. The offset-value can be
set from - 12 dB to +12 dB.
To Next Page
Loading...