SUPREMA - OPERATION & SERVICE MANUAL
Page 18 of 58 02-2012 Suprema - Operation & Service
Enabling Switches
1. To enable the switches and functions that are required, press the "UP" button on the
hidden menu scroll buttons and scroll until the following message appears,
a) Press the "START" button to enter set mode.
b) On initial set-up, all the LED's will be illuminated at this point, meaning that
everything is switched "
ON". To disable certain features, press the button that
corresponds to that feature and the LED will switch off. That feature has now been
disabled.
c) Repeat this procedure for any other feature that you require to cancel.
d) Press the “start” button to save any changes that were made.
e) To exit the "
ENABLE SWITCHES" mode and proceed to the next setting, press the
hidden "
UP" or "DOWN" scroll buttons.
When a selection is disabled and the customer presses the corresponding button for that
selection, the following message appears on the display,
Canceling Individual Settings
It is possible to cancel any individual setting on the selection panel (providing this setting can
be priced). For example, if all three cup sizes are required for coffee, but the customer requires
only a large cup for hot chocolate, it is possible to cancel only the small and medium cups for
hot chocolate, without canceling the large cup.
1. To cancel individual selections, press the "
UP" button on the hidden menu scroll
buttons and scroll to the "
SET PRICE" menu.
a) Press the "START" button to enter the set mode.
b) At this point, you can now select the price setting for the cup size and product you
want to cancel by pressing the appropriate buttons on the selection panel. The price
setting displayed will correspond to the LED's that are illuminated.
c) Decrease the price to zero by pressing the hidden "
DOWN" button.
d) Once the price is at zero, press the hidden "
DOWN" button once more. The price
will disappear, and a "
DISABLED" message will appear on the second row of the
display. This indicates that this particular product is now canceled.
e) Repeat this procedure for another product, or press the "
UP" or "DOWN" scroll
buttons to access another menu.
ENABLE SWITCH
PRESS <START>
SELECTION
NOT AVAILABLE
Note:
Selections with
illuminated LED’s
will be active, and
those without
illuminated LED’s
will be disabled.
Check the settings
before exiting and
once verified, press
the “START” button
to save them.
Note:
Only selections that
can be priced may
be canceled.
Once canceled, a
“SELECTION NOT
AVAILABLE” message
appears on the
display when the
product is selected
by the customer.
To Next Page
Loading...