EasyManua.ls Logo

VKI Technologies Suprema - Locking the Counters; Force Vend Feature

Default Icon
58 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SUPREMA - OPERATION & SERVICE MANUAL
Page 28 of 58 02-2012 Suprema - Operation & Service
Locking the Counters
This feature will allow you to lock the counters, preventing the caretaker from resetting them.
With this lock enabled, it will not be possible to reset any of the counters when in the
"
COUNTER" mode. If the counters need to be reset, it will be necessary to go to this menu to
unlock them first. This obviously requires the "
SET-UP" mode access code, limiting the number
of people that can go into the programming to unlock the counters. Once they are unlocked,
they can be reset using the normal counter resetting procedures outlined in this manual. Please
note that this feature is disabled when the equipment is shipped from the factory.
1. To lock all the counters, press the "
UP" button on the hidden menu scroll buttons
and scroll until the following message appears,
a) Press the "
START" button to enter the set mode.
b) Using the hidden setting adjustment buttons, select
ON” to lock the counters, or
OFF” to unlock them.
c) To save, press either one of the two hidden menu scroll buttons once the desired
function is displayed on the LCD.
Setting the Force Vend Feature
There are three different settings that can be programmed for this particular feature. This
feature can be set in the "
SET-UP" mode.
1. To set the “
FORCE VEND” feature, press the "UP" button on the hidden menu scroll
buttons and scroll until the following message appears,
a) Press the "START" button to enter the set mode.
b) Using the hidden setting adjustment buttons, select one of the following settings.
ON NORMAL- the coin return feature on the Coinco is
completely disabled, regardless of what coins are inserted.
ON SMART- the coin return feature is disabled only when a $1
or $2 coin is inserted.
OFF- the force vend feature is disabled and the unit will
function normally.
c) To save, press either one of the two hidden menu scroll buttons once the desired
function is displayed on the LCD.
LOCK COUNTERS
PRESS <START>
FORCE VEND
PRESS <START>
Note:
This feature prevents
people from using
the Suprema as a
‘change maker’
(usually done by
inserting a $1 or $2
coin, and pressing
the coin return
button to get change
in quarters).

Table of Contents