SUPREMA - OPERATION & SERVICE MANUAL
Page 26 of 58 02-2012 Suprema - Operation & Service
Programming a Custom Message (N/A on APP Models)
This software allows you to program a custom message to appear on the display. When this
function is enabled and the text has been programmed, the message on the display will then
toggle back and forth from the "standby" message to your customized message. Upper and
lower case letters, numbers and an assortment of symbols are provided as text for setting your
custom message.
1. To set a custom message to appear on the display, press the "
UP" button on the
hidden menu scroll buttons until the following message appears,
a) Press the "START" button to enter the set mode.
b) On the display, you will notice a line underneath the first character. To change this
character, use the hidden setting adjustment buttons to scroll to the next or previous
characters. Keep scrolling until the character you require is displayed in this
location.
c) To proceed to the next character space, press the "
START" button and the line will
move underneath the next character.
d) Repeat these procedures until your custom message is complete.
e) To save, press either one of the two hidden menu scroll buttons.
Please note that when entering a custom message, the display has two lines of message space
with 16 characters on the first line and 15 on the second. Verify that your message fits in the
available space. Also note that the
“CUSTOM MESSAGE” feature must be enabled in the
“
MESSAGES ON/OFF” menu for it to function.
Setting Language
The messages that appear on the LCD can be displayed in either English or French. Please note
that the coffee maker will be shipped from the factory with the messages set to English.
1. To set the language, press the "
UP" button on the hidden menu scroll buttons and
scroll until the following message appears,
a) Press the "
START" button to enter the set mode.
b) Using the hidden setting adjustment buttons, select “
ENGLISH”, or “FRENCH”, or
“
ENGLISH + FRENCH”.
c) To save, press either one of the two hidden menu scroll buttons.
CUSTOM MESSAGES
PRESS <START>
SET LANGUAGE
PRESS <START>
Tip:
Two shortcut keys
can be used on the
selection panel to
speed up
programming the
custom message. If
the “COFFEE” button is
pressed, the
underlined character
will be erased. If any
one of the cup size
buttons is pressed,
the upper case letter
“A” will appear over
the cursor.
Note:
If “ENGLISH + FRENCH”
is selected, the
messages on the
display will
continuously toggle
from English to
French
approximately every
three seconds.
To Next Page
Loading...