Service and maintenance
154 Hydraulic system
Bio oil
When changing from a mineral oil to a bio oil, contact a workshop
authorised by Volvo CE.
Hydraulic system, return oil filter and
magnetic rods
IMPORTANT! Exercise cleanliness when filling oil and in all
work on the hydraulic system.
Replace the return oil filter and clean the magnetic rod every
2000 hours. A first change of the return oil filter as well as
cleaning of the magnetic rods shall take place at the 1000
hour warranty inspection.
1 Remove cover (A).
2 Remove the filter insert.
3 Clean the magnetic rod (D) and install a new filter (C) in the
filter holder (B).
4 Check the O-rings on the magnetic rod and in the cover.
5 Reinstall the filter insert and the cover.
Hydraulic system, breather filter
Replace breather filter (E) every 1000 hours.
1 Remove the cover.
2 Replace the filter insert.
3 Reinstall the cover.
1014797
A
B
D
E
C
A Cap, return oil filter and magnetic rod
B Filter holder
C Return oil filter
D Magnetic rod
E Breather filter
To Next Page
Loading...
