Service and maintenance
Hydraulic system 155
Cooling fan, replacing return oil filter
IMPORTANT! Exercise cleanliness when filling oil and in all
work on the hydraulic system.
Replace oil filter every 2000 hours.
Removing
1 Use a socket and ratchet handle or other suitable tool to
remove the filter cover.
2 Remove the filter.
Installing
3 Install the new filter.
4 Screw on the cover.
Take care of filters/oils/liquids in an environmentally safe way,
see page 97.
A Cover
B Return oil filter
1
7
A
B
To Next Page
Loading...
