EasyManua.ls Logo

Volvo XC40 - Activating and Starting Pilot Assist

Volvo XC40
646 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
||
DRIVER SUPPORT
300
Collision risk warning
Audio and symbol for collision warning
55
.
Acoustic warning signal in the event of a risk
of collision
Warning signal in the event of a risk of colli-
sion
Distance measurement with the camera and
radar unit
Pilot Assist uses approx. 40% of the foot brake's
capacity. If the car needs to be braked more
heavily than Pilot Assist is capable of and the
driver does not brake, the warning lamp and
acoustic warning are activated to alert the driver
that immediate intervention is required.
WARNING
Pilot Assist only gives warning about vehicles
detected by its camera and radar unit – there-
fore a warning may not occur or be delayed.
•
Never wait for a warning. Apply the
brakes when the situation requires!
Related information
•
Pilot Assist (p. 296)
Activating and starting Pilot Assist
Pilot Assist must first be activated and then
started to be able to control speed and distance
and to give steering assistance.
NOTE: The illustration is schematic - details may vary
depending on car model.
In order to start the Pilot Assist it is required that:
•
The driver's seatbelt must be buckled and
the driver's door must be closed.
•
There must be a vehicle (the "target vehicle")
within reasonable distance in front of the car,
or the current speed must be at least
15 km/h (9 mph).
•
For cars with manual gearbox. Speed must
be at the lowest 30 km/h (20 mph).
55
The figure is schematic - parts may vary depending on car model.

Table of Contents