Volvo XC40 - Limitations of BLIS

DRIVER SUPPORT
* Option/accessory.
340
Limitations of BLIS
The BLIS
73
function may have limitations in cer-
tain situations.
Keep the surface clean - on both the left and right-hand
sides of the car
74
.
Examples of limitations:
•
Dirt, ice and snow covering the sensors may
reduce the functions and deactivate alerts.
•
The BLIS function is automatically deacti-
vated if a trailer, bicycle rack or similar is con-
nected to the car's electrical system.
•
For optimal performance of BLIS, no bicycle
rack, luggage carrier or similar should be
mounted on the car's towbar.
WARNING
•
BLIS does not work on sharp bends.
•
BLIS does not work when the car is
reversing.
Related information
•
BLIS* (p. 338)
Recommended maintenance for
BLIS
•
To ensure optimal functionality, the surfaces
in front of the sensors must be kept clean.
•
Do not affix any objects, tape or labels in the
area of the sensors.
Keep the surface clean - on both the left and right-hand
sides of the car
75
.
The sensors for BLIS are located inside each
corner of the rear wing/bumper. The sensors are
also used by the Cross Traffic Alert (CTA) and
Rear Collision Warning functions.
73
Blind Spot Information
74
NOTE: The illustration is schematic - details may vary depending on car model.
75
NOTE: The illustration is schematic - details may vary depending on car model.