VPG VanWeigh - Page 11

To Next Page

To Previous Page

Air Pressure Transducer

The parts for the air pressure

transducer are supplied in a bag.

A single air transducer is made up

from a T-connector, a brass sensor

tting and two plastic air pipe

ttings

This is supplied for air suspension

systems

A single transducer is supplied

for each transducer position. See

“Sensor installation positions” on

page 23.

Part No: 996210C (For air pipe

outside diameter 8mm & 10mm)

Part No: 542549 (Air sensor only)

Internal Domain Cable with Air

Transducer Fitting

A single transducer cable is

supplied for each air transducer

position. See “Sensor installation

positions” on page 23.

Part No: DRG-106001

VanWeigh